/*
|
* Copyright Cypress Semiconductor Corporation, 2014-2015 All rights reserved.
|
*
|
* This software, associated documentation and materials ("Software") is
|
* owned by Cypress Semiconductor Corporation ("Cypress") and is
|
* protected by and subject to worldwide patent protection (UnitedStates and foreign), United States copyright laws and international
|
* treaty provisions. Therefore, unless otherwise specified in a separate license agreement between you and Cypress, this Software
|
* must be treated like any other copyrighted material. Reproduction,
|
* modification, translation, compilation, or representation of this
|
* Software in any other form (e.g., paper, magnetic, optical, silicon)
|
* is prohibited without Cypress's express written permission.
|
*
|
* Disclaimer: THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY
|
* KIND, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
|
* NONINFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
* FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes
|
* to the Software without notice. Cypress does not assume any liability
|
* arising out of the application or use of Software or any product or
|
* circuit described in the Software. Cypress does not authorize its
|
* products for use as critical components in any products where a
|
* malfunction or failure may reasonably be expected to result in
|
* significant injury or death ("High Risk Product"). By including
|
* Cypress's product in a High Risk Product, the manufacturer of such
|
* system or application assumes all risk of such use and in doing so
|
* indemnifies Cypress against all liability.
|
*
|
* Use of this Software may be limited by and subject to the applicable
|
* Cypress software license agreement.
|
*
|
*
|
*/
|
|
#ifndef CySmart_Constants_h
|
#define CySmart_Constants_h
|
|
|
#endif
|
|
enum alertOptions
|
{
|
kAlertNone,
|
kMidAlert,
|
kHighAlert
|
};
|
|
#define APP_NAME @"CySmart"
|
|
//Constant for enabling disabling OTA : To disable change YES to NO and vice versa
|
#define ENABLE_OTA [NSNumber numberWithBool:YES]
|
|
//Constant for enabling disabling Glucose Service : To disable change YES to NO and vice versa
|
#define ENABLE_GLUCOSE [NSNumber numberWithBool:NO]
|
|
#define BLUE_COLOR [UIColor colorWithRed:12.0f/255.0f green:55.0f/255.0f blue:123.0f/255.0f alpha:1.0f]
|
|
#define BLE_PRODUCTS_URL @"http://www.cypress.com/ble"
|
#define CONTACT_URL @"http://www.cypress.com/contactus/"
|
#define CYPRESS_HOME_URL @"http://www.cypress.com/"
|
#define CYPRESS_MOBILE_URL @"http://www.cypress.com/cysmartmobile"
|
|
|
#define DEVICE_CONNECTION_TIMEOUT 10.0
|
|
|
#define ABOUT_VIEW_NIB_NAME @"AboutView"
|
#define BUNDLE_VERSION_KEY @"CFBundleShortVersionString"
|
|
#define KEYBOARD_HEIGHT 305.0f
|
#define STATUS_BAR_HEIGHT 20.0f
|
#define NAV_BAR_HEIGHT 44.0f
|
#define SEARCH_BAR_TAG 101
|
|
#define DEFAULT_SIZE_NORMALISATION_CONSTANT_FOR_IPAD 80.0f
|
|
#define RSC_SERVICE_UUID [CBUUID UUIDWithString:@"1814"]
|
#define RSC_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A53"]
|
|
|
#define POLARH7_HRM_DEVICE_INFO_SERVICE_UUID @"180A" // 180A = Device Information
|
|
|
#define HRM_HEART_RATE_SERVICE_UUID [CBUUID UUIDWithString:@"180D"]
|
#define HRM_NOTIFICATIONS_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A37"]
|
#define HRM_BODY_LOCATION_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A38"]
|
|
#define CSC_SERVICE_UUID [CBUUID UUIDWithString:@"1816"]
|
#define CSC_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A5B"]
|
|
#define BP_SERVICE_UUID [CBUUID UUIDWithString:@"1810"]
|
#define BP_MEASUREMENT_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A35"]
|
|
|
#define GLUCOSE_SERVICE_UUID [CBUUID UUIDWithString:@"1808"]
|
#define GLUCOSE_MEASUREMENT_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A18"]
|
|
|
#define THM_SERVICE_UUID [CBUUID UUIDWithString:@"1809"]
|
#define THM_TEMPERATURE_MEASUREMENT_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A1C"]
|
#define THM_TEMPERATURE_TYPE_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A1D"]
|
|
#define DEVICE_INFO_SERVICE_UUID [CBUUID UUIDWithString:@"180A"]
|
#define DEVICE_MANUFACTURER_NAME_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A29"]
|
#define DEVICE_MODEL_NUMBER_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A24"]
|
#define DEVICE_SERIAL_NUMBER_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A25"]
|
#define DEVICE_HARDWARE_REVISION_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A27"]
|
#define DEVICE_FIRMWARE_REVISION_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A26"]
|
#define DEVICE_SOFTWARE_REVISION_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A28"]
|
#define DEVICE_SYSTEMID_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A23"]
|
#define DEVICE_CERTIFICATION_DATALIST_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A2A"]
|
#define DEVICE_PNPID_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A50"]
|
|
|
#define BATTERY_LEVEL_SERVICE_UUID [CBUUID UUIDWithString:@"180F"]
|
#define BATTERY_LEVEL_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A19"]
|
|
|
#define CAPSENSE_SERVICE_UUID [CBUUID UUIDWithString:@"CAB5"]
|
#define CAPSENSE_PROXIMITY_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"CAA1"]
|
#define CAPSENSE_SLIDER_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"CAA2"]
|
#define CAPSENSE_BUTTON_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"CAA3"]
|
|
#define CUSTOM_CAPSENSE_SERVICE_UUID [CBUUID UUIDWithString:@"0003cab5-0000-1000-8000-00805f9b0131"]
|
#define CUSTOM_CAPSENSE_PROXIMITY_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"0003caa1-0000-1000-8000-00805f9b0131"]
|
#define CUSTOM_CAPSENSE_SLIDER_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"0003caa2-0000-1000-8000-00805f9b0131"]
|
#define CUSTOM_CAPSENSE_BUTTONS_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"0003caa3-0000-1000-8000-00805f9b0131"]
|
|
|
|
#define RGB_SERVICE_UUID [CBUUID UUIDWithString:@"CBBB"]
|
#define RGB_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"CBB1"]
|
|
#define CUSTOM_RGB_SERVICE_UUID [CBUUID UUIDWithString:@"0003cbbb-0000-1000-8000-00805f9b0131"]
|
#define CUSTOM_RGB_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"0003cbb1-0000-1000-8000-00805f9b0131"]
|
|
|
|
|
#define TRANSMISSION_POWER_SERVICE [CBUUID UUIDWithString:@"1804"]
|
#define TRANSMISSION_POWER_LEVEL_UUID [CBUUID UUIDWithString:@"2A07"]
|
#define LINK_LOSS_SERVICE_UUID [CBUUID UUIDWithString:@"1803"]
|
#define IMMEDIATE_ALERT_SERVICE_UUID [CBUUID UUIDWithString:@"1802"]
|
#define ALERT_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"2A06"]
|
|
|
#define DESCRIPTOR_CHARACTERISTIC_EXTENDED_PROPERTY_UUID [CBUUID UUIDWithString:@"2900"]
|
#define DESCRIPTOR_CHARACTERISTIC_USER_DESCRIPTION_UUID [CBUUID UUIDWithString:@"2901"]
|
#define DESCRIPTOR_CLIENT_CHARACTERISTIC_CONFIG_UUID [CBUUID UUIDWithString:@"2902"]
|
#define DESCRIPTOR_SERVER_CHARACTERISTIC_CONFIG_UUID [CBUUID UUIDWithString:@"2903"]
|
#define DESCRIPTOR_CHARACTERISTIC_PRESENTATION_FORMAT_UUID [CBUUID UUIDWithString:@"2904"]
|
#define DESCRIPTOR_CHARACTERISTIC_AGGREGATE_FORMAT_UUID [CBUUID UUIDWithString:@"2905"]
|
#define DESCRIPTOR_VALID_RANGE_UUID [CBUUID UUIDWithString:@"2906"]
|
#define DESCRIPTOR_EXTERNAL_REPORT_REFERENCE_UUID [CBUUID UUIDWithString:@"2907"]
|
#define DESCRIPTOR_REPORT_REFERENCE_UUID [CBUUID UUIDWithString:@"2908"]
|
#define DESCRIPTOR_ENVIRONMENTAL_SENSING_CONFIG_UUID [CBUUID UUIDWithString:@"290B"]
|
#define DESCRIPTOR_ENVIRONMENTAL_SENSING_MEASUREMENT_UUID [CBUUID UUIDWithString:@"290C"]
|
#define DESCRIPTOR_ENVIRONMENTAL_SENSING_TRIGGER_SETTING_UUID [CBUUID UUIDWithString:@"290D"]
|
|
|
|
#define BAROMETER_SERVICE_UUID [CBUUID UUIDWithString:@"00040001-0000-1000-8000-00805f9b0131"]
|
#define BAROMETER_DIGITAL_SENSOR_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"00040002-0000-1000-8000-00805f9b0131"]
|
#define BAROMETER_SENSOR_SCAN_INTERVAL_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"00040004-0000-1000-8000-00805f9b0131"]
|
#define BAROMETER_DATA_ACCUMULATION_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"00040007-0000-1000-8000-00805f9b0131"]
|
#define BAROMETER_READING_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"00040009-0000-1000-8000-00805f9b0131"]
|
#define BAROMETER_THRESHOLD_FOR_INDICATION_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"0004000d-0000-1000-8000-00805f9b0131"]
|
|
|
#define ACCELEROMETER_SERVICE_UUID [CBUUID UUIDWithString:@"00040020-0000-1000-8000-00805f9b0131"]
|
#define ACCELEROMETER_ANALOG_SENSOR_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"00040021-0000-1000-8000-00805f9b0131"]
|
#define ACCELEROMETER_SENSOR_SCAN_INTERVAL_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"00040023-0000-1000-8000-00805f9b0131"]
|
#define ACCELEROMETER_DATA_ACCUMULATION_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"00040026-0000-1000-8000-00805f9b0131"]
|
#define ACCELEROMETER_READING_X_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"00040028-0000-1000-8000-00805f9b0131"]
|
#define ACCELEROMETER_READING_Y_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"0004002b-0000-1000-8000-00805f9b0131"]
|
#define ACCELEROMETER_READING_Z_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"0004002d-0000-1000-8000-00805f9b0131"]
|
|
|
|
#define ANALOG_TEMPERATURE_SERVICE_UUID [CBUUID UUIDWithString:@"00040030-0000-1000-8000-00805f9b0131"]
|
#define TEMPERATURE_ANALOG_SENSOR_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"00040031-0000-1000-8000-00805f9b0131"]
|
#define TEMPERATURE_SENSOR_SCAN_INTERVAL_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"00040032-0000-1000-8000-00805f9b0131"]
|
#define TEMPERATURE_READING_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"00040033-0000-1000-8000-00805f9b0131"]
|
|
#define WARNING @"Warning!"
|
#define UNKNOWN_ERROR @"An Unknown error occurred."
|
|
|
#define CUSTOM_BOOT_LOADER_SERVICE_UUID [CBUUID UUIDWithString:@"00060000-F8CE-11E4-ABF4-0002A5D5C51B"]
|
#define BOOT_LOADER_CHARACTERISTIC_UUID [CBUUID UUIDWithString:@"00060001-F8CE-11E4-ABF4-0002A5D5C51B"]
|
|
#define COMMAND_START_BYTE 0x01
|
#define COMMAND_END_BYTE 0x17
|
//Bootloader command codes
|
|
#define VERIFY_CHECKSUM 0x31
|
#define GET_FLASH_SIZE 0x32
|
#define SEND_DATA 0x37
|
#define ENTER_BOOTLOADER 0x38
|
#define PROGRAM_ROW 0x39
|
#define VERIFY_ROW 0x3A
|
#define EXIT_BOOTLOADER 0x3B
|
|
|
// Bootloader status/Error codes
|
|
#define SUCCESS @"0x00"
|
#define ERROR_FILE @"0x01"
|
#define ERROR_EOF @"0x02"
|
#define ERROR_LENGTH @"0x03"
|
#define ERROR_DATA @"0x04"
|
#define ERROR_COMMAND @"0x05"
|
#define ERROR_DEVICE @"0x06"
|
#define ERROR_VERSION @"0x07"
|
#define ERROR_CHECKSUM @"0x08"
|
#define ERROR_ARRAY @"0x09"
|
#define ERROR_ROW @"0x0A"
|
#define ERROR_BOOTLOADER @"0x0B"
|
#define ERROR_APPLICATION @"0x0C"
|
#define ERROR_ACTIVE @"0x0D"
|
#define ERROR_UNKNOWN @"0x0F"
|
#define ERROR_ABORT @"0xFF"
|
|
|
|
|
#define FLASH_ARRAY_ID @"flashArrayID"
|
#define FLASH_ROW_NUMBER @"flashRowNumber"
|
|
#define CHECK_SUM @"chec.3kSum"
|
#define CRC_16 @"crc_16"
|
#define ROW_DATA @"rowData"
|
|
|
#define BLOOD_PRESSURE_UNIT_mmHg @"mmHg"
|
#define BLOOD_PRESSURE_UNIT_kPa @"kPa"
|
|
/*Carousel View Strings*/
|
#pragma mark - Carousel View
|
|
#define SERVICES @"Services"
|
#define GENERIC_ACCESS_SERVICE_UUID @"00001800-0000-1000-8000-00805f9b34fb"
|
|
#define k_SERVICE_IMAGE_NAME_KEY @"Service_Image"
|
#define k_SERVICE_NAME_KEY @"Service_Name"
|
|
#define DEFAULT_FONT_BOLD @"Roboto-Bold"
|
|
#define HRM_VIEW_SB_ID @"HRMId"
|
#define RSC_VIEW_SB_ID @"RSCID"
|
#define CSC_VIEW_SB_ID @"CSCId"
|
#define DEVICE_INFO_VIEW_SB_ID @"DeviceInfoID"
|
#define GLUCOSE_VIEW_SB_ID @"glucoseVCID"
|
#define BP_VIEW_SB_ID @"BloodPressureID"
|
#define CAPSENSE_VIEW_SB_ID @"CapsenseRootID"
|
#define CAPSENSE_BTN_VIEW_SB_ID @"CapsenseButtonID"
|
#define PROXIMITY_VIEW_SB_ID @"proximityVCId"
|
#define CAPSENSE_SLIDER_VIEW_SB_ID @"sliderVCId"
|
#define RGB_VIEW_SB_ID @"RGBViewID"
|
#define HEALTH_THERMO_VIEW_SB_ID @"HealthThermometerID"
|
#define BATTERY_VIEW_SB_ID @"BatteryServiceID"
|
#define FIND_ME_VIEW_SB_ID @"findMeID"
|
#define SENSOR_HUB_VIEW_SB_ID @"sensorHubID"
|
#define GATTDB_VIEW_SB_ID @"ServicesID"
|
#define FILE_SEL_VIEW_SB_ID @"FileSelectionID"
|
|
/*Navigation Bar Titles*/
|
#pragma mark - Navigation Bar Titles
|
|
// Device information strings
|
|
#define MANUFACTURER_NAME @"Manufacturer Name"
|
#define MODEL_NUMBER @"Model Number"
|
#define SERIAL_NUMBER @"Serial Number"
|
#define HARDWARE_REVISION @"Hardware Revision"
|
#define FIRMWARE_REVISION @"Firmware Revision"
|
#define SOFTWARE_REVISION @"Software Revision"
|
#define SYSTEM_ID @"System ID"
|
#define REGULATORY_CERTIFICATION_DATA_LIST @"Regulatory Certification Data List"
|
#define PNP_ID @"PnP ID"
|
|
|
#define BLE_DEVICE @"BLE Devices"
|
#define UNKNOWN_PERIPHERAL @"Unknown Peripheral"
|
#define BACK_BUTTON_IMAGE @"backButton"
|
|
|
/* characteristic properties*/
|
|
#define READ @"Read"
|
#define WRITE @"Write"
|
#define NOTIFY @"Notify"
|
#define INDICATE @"Indicate"
|
|
/* firmware upgrade */
|
|
#define FIRMWARE_DISCONNECTION_ERROR @"You have application upgrade pending."
|
|
|
|
/* log strings */
|
|
#define CONNECTION_REQUEST @"Connection request sent"
|
#define CONNECTION_ESTABLISH @"Connection established"
|
#define PAIRING_REQUEST @"Pairing request sent"
|
#define PAIRING_RQUEST_RECEIVED @"Pairing request received"
|
#define PAIRED @"Paired"
|
#define UNPAIRED @"Unpaired"
|
#define SERVICE_DISCOVERY_REQUEST @"Service discovery request sent"
|
#define SERVICE_DISCOVERY_STATUS @"Service discovery status "
|
#define DISCONNECTION_REQUEST @"Disconnection request sent"
|
#define DISCONNECTED @"Disconnected"
|
|
#define SERVICE_DISCOVERED @"Success"
|
#define SERVICE_DISCOVERY_ERROR @"Service discovery request failed with error : "
|
|
// BLE operations
|
|
#define WRITE_REQUEST @"Write request sent with value "
|
#define WRITE_REQUEST_STATUS @"Write request status "
|
#define WRITE_SUCCESS @"Success"
|
#define WRITE_ERROR @"Failed with error : "
|
|
#define START_NOTIFY @"Start notification request sent"
|
#define STOP_NOTIFY @"Stop notification request sent"
|
#define NOTIFY_RESPONSE @"Notification received with value "
|
|
#define READ_REQUEST @"Read request sent"
|
#define READ_RESPONSE @"Read response received with value "
|
#define READ_ERROR @"Failed with error : "
|
|
|
#define START_INDICATE @"Start indicate request sent"
|
#define STOP_INDICATE @"Stop indicate request sent"
|
#define INDICATE_RESPONSE @"Indicate response received with value "
|
|
|
|
|
|
#define DATA_SEPERATOR @"##"
|
|
/* Date formats */
|
|
#define DATE_FORMAT @"dd-MMM-yyyy"
|
#define TIME_FORMAT @"HH:mm:ss"
|
|
//Device Detection Macros
|
#pragma mark - Device detection macros
|
|
#define IS_IPAD (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad)
|
#define IS_IPHONE (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPhone)
|
#define IS_RETINA ([[UIScreen mainScreen] scale] >= 2.0)
|
|
#define SCREEN_WIDTH ([[UIScreen mainScreen] bounds].size.width)
|
#define SCREEN_HEIGHT ([[UIScreen mainScreen] bounds].size.height)
|
#define SCREEN_MAX_LENGTH (MAX(SCREEN_WIDTH, SCREEN_HEIGHT))
|
#define SCREEN_MIN_LENGTH (MIN(SCREEN_WIDTH, SCREEN_HEIGHT))
|
|
#define IS_IPHONE_4_OR_LESS (IS_IPHONE && SCREEN_MAX_LENGTH < 568.0)
|
#define IS_IPHONE_5 (IS_IPHONE && SCREEN_MAX_LENGTH == 568.0)
|
#define IS_IPHONE_6 (IS_IPHONE && SCREEN_MAX_LENGTH == 667.0)
|
#define IS_IPHONE_6P (IS_IPHONE && SCREEN_MAX_LENGTH == 736.0)
|
|
|
//OTA Upgrade
|
#pragma mark - OTA Upgrade
|
|
#define OTA_UPGRADE_STATUS @"UpgradeStatus"
|
|
#define OTA_UPGRADE_CANCELLED_MSG @"Firmware upgrade cancelled."
|
#define OTA_FILES_SELECTED_MSG @"Firmware File(s) Selected."
|
#define OTA_UPGRADE_IN_PROGRESS_MSG @"Firmware upgrade in progress."
|
#define OTA_UPGRADE_COMPLETED_MSG @"Firmware upgrade completed successfully."
|
#define OTA_APP_UPGRADE_PENDING_MSG @"Stack upgrade completed successfully. Application upgrade pending."
|
#define OTA_ROW_NO_OUT_OF_BOUND_MSG @"Error: The row number exceeds the bounds"
|
#define OTA_INVALID_APPLICATION_FILE_MSG @"Error: The application is invalid"
|
#define OTA_CHECKSUM_MISMATCH_MSG @"Error: The checksum do not match"
|
#define OTA_WRITING_FAILED_MSG @"Error: Failed writing data row"
|
#define OTA_SEND_DATA_COMMAND_FAILED @"Error: Failed writing data with SEND_DATA command"
|
#define OTA_SILICON_ID_MISMATCH_MSG @"Error: The SiliconID or SiliconRev does not match"
|
#define OTA_UPGRADE_CANCEL_CONFIRM_MSG @"Do you want to cancel the OTA update?"
|
#define OTA_UPGRADE_RESUME_CONFIRM_MSG @"Do you want to resume the OTA update?"
|
#define OTA_APP_UPGRADE_PENDING_WARNIG @"Warning! Application upgrade pending."
|
